GEB 085046 3.7V 80mAh Ultra-Thin Flexible LiPo Battery (0.8×50×46mm)
Grade-A GEB 085046 3.7V 80mAh Ultra-Thin Flexible LiPo Battery (0.8×50×46mm) (3.7V, 80mAh) pouch cell engineered for Ultra-compact wearable devices, wearable fitness sensors, Bluetooth earbuds, medical biosensors, and IoT asset trackers with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 085046 3.7V 80mAh Ultra-Thin Flexible LiPo Battery (0.8×50×46mm) is a specialized sub-millimeter Lithium Polymer (LiPo) power solution delivering 3.7V nominal voltage and 80mAh rated capacity (0.296Wh) in a 0.8mm profile. Engineered with an ultra-thin foil laminate envelope and planar electrode assembly, this cell is optimized for ultra-slim profile form factors including smart cards, RFID active tags, electronic shelf labels (ESL), and disposable medical diagnostic patches. Engineers should account for flat bend radii limitations and adhere to low-temperature heat sealing guidelines during card lamination processes.
Product Overview
The GEB 085046 3.7V 80mAh Ultra-Thin Flexible LiPo Battery (0.8×50×46mm) is a Grade-A paper-thin rechargeable lithium polymer cell engineered specifically for low-profile electronics where standard cylindrical or thicker pouch cells cannot fit. Delivering 3.7V nominal voltage and 80mAh rated capacity, this cell utilizes advanced micro-foil stacking technology, hermetic edge sealing, and ultra-thin polymer electrolyte. Featuring ultra-slim physical dimensions of 0.8 × 50.0 × 46.0 mm (±0.2mm) and an ultralight unit weight of Approx. 2.2g ± 0.3g, it delivers outstanding planar space utilization in credit-card-sized devices, active RFID tracking badges, smart security tokens, and wearable biometric patches.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Ultra-Thin Lithium Cobalt Oxide Polymer (LiCoO2 LiPo) |
| Nominal Voltage & Capacity | 3.7V / 80mAh (0.296Wh) |
| Physical Dimensions & Weight | 0.8 × 50.0 × 46.0 mm (±0.2mm) / Approx. 2.2g ± 0.3g |
| Continuous Discharge Rating | 0.5C–1.0C (40mA–80mA continuous discharge) |
| Peak Pulse Discharge | 1.5C (120mA pulse ≤ 5s) |
| Target Applications | Smart credit cards, active RFID tags, electronic shelf labels, wearable medical sensor patches, thin IoT tracking devices |
| Standard Terminals | Ultra-thin bare nickel tabs / optional flexible printed circuit (FPC) leads |
| Baseline Cycle Life | ≥ 400–600 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Voltage | 3.7V | Standard measurement @ 25°C, 0.2C discharge |
| Upper Charge Voltage Cutoff | 4.20V ± 0.02V | CC/CV charge mode, 0.02C termination current |
| Discharge Lower Cutoff | 3.00V ± 0.03V | PCM / Controller automatic low-voltage cutoff |
| Standard Charge Current | 0.2C – 0.5C (16mA to 40mA) | Max recommended fast charge: 1.0C (80mA) |
| Internal AC Resistance (1kHz) | ≤ 120 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.5mΩ | Pre-assembly automated barcode classification |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Storage: 15~25°C (60% SoC storage) |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 085046 3.7V 80mAh Ultra-Thin Flexible LiPo Battery (0.8×50×46mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 80mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
Why LiFePO4 Batteries Perform Better in Energy Storage Systems (ESS): Technical & Economic Analysis
Comprehensive technical comparison of LiFePO4 vs NMC and lead-acid in energy storage systems (ESS): 6000+ cycle life, thermal runaway safety, and low LCOS.
