GEB 14.8V 4S 6000mAh 45C High-Rate LiPo Battery Pack for Industrial Inspection UAVs
Industrial-grade 14.8V 4S 6000mAh 45C LiPo battery pack (Approx. 585g, 88.8Wh) delivering 270A continuous discharge, low thermal rise, XT90-S anti-spark plug, and JST-XH balance leads for heavy-lift inspection multirotors and mapping UAVs.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 14.8V 4S 6000mAh 45C High-Rate LiPo Battery Pack is a commercial-grade high-drain Lithium Polymer power unit built for mission-critical aerial platforms. Delivering 14.8V nominal voltage (3.7V per cell × 4S) and 6,000mAh rated capacity (88.8Wh energy), this heavy-duty pack provides sustained 45C continuous discharge (270A continuous load) with instantaneous 90C burst capabilities (540A ≤ 5s). Utilizing ultra-thin microporous polyolefin separators and precision laminated copper/aluminum collector tabs, it mitigates voltage sag under extreme thrust spikes on industrial inspection quadcopters, mapping UAVs, and LiDAR payload platforms.
Product Overview
The GEB 14.8V 4S 6000mAh 45C LiPo Battery Pack delivers exceptional power-to-weight performance with high gravimetric energy density. Constructed from four high-rate pouch cells assembled with internal heat-dissipation plates, the pack maintains uniform core temperatures under continuous high-throttle regimes. Encased in a reinforced structural wrap measuring 150 × 48 × 42 mm and weighing Approx. 585g, it comes equipped with high-conductivity 8AWG/10AWG silicone wiring, an XT90-S anti-spark connector to eliminate inrush arc erosion on ESC capacitors, and an industrial JST-XH 5-pin balance terminal.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | High-Rate Lithium Polymer (LiPo Pouch Matrix) |
| Configuration | 4S1P (4 Cells in Series) |
| Nominal Voltage & Capacity | 14.8V / 6000mAh (88.8Wh) |
| Continuous Discharge Rating | 45C Continuous (270A continuous discharge) |
| Peak Burst Discharge | 90C Peak Burst (540A ≤ 5 seconds) |
| Physical Dimensions (L×W×H) | 150 × 48 × 42 mm (±2.0mm) |
| Pack Weight | Approx. 585 g (±15g) |
| Terminals & Wiring | XT90-S Anti-Spark Connector (8AWG/10AWG Silicone Wire) + JST-XH 5P Balance Lead |
| Target Applications | Industrial power line inspection UAVs, perimeter security drones, LiDAR survey multirotors |
| Cycle Endurance | ≥ 300–500 cycles (80% DoD @ 1C charge / 20C discharge) |
Technical Specifications
| Parameter | Value | Test Conditions & Tolerances |
|---|---|---|
| Nominal Voltage | 14.8V | Standard measurement @ 25°C, 1.0C discharge rate |
| Max Charge Cutoff Voltage | 16.80V ± 0.05V (4.20V/cell) | Dedicated CC/CV LiPo smart balance charger |
| Recommended Low-Voltage RTL Trigger | 13.20V – 14.00V (3.30V–3.50V/cell) | Under dynamic flight load telemetry settings |
| Critical Lower Voltage Limit | 12.00V (3.00V/cell) | Absolute threshold to avoid irreversible pouch deformation |
| Standard Charge Current | 1.0C (6.0A) | Recommended for maximum cycle endurance |
| Maximum Rapid Charge Current | 2.0C–3.0C (12.0A–18.0A) | Temperature-monitored fast charging |
| Internal AC Resistance (1kHz) | ≤ 1.5–2.2 mΩ per cell | 1kHz AC impedance test fully charged |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~60°C | Storage: 15~25°C (3.82V–3.85V/cell storage voltage) |
Integration & System Design Guidelines
Anti-Spark Pre-Charge Integration: The factory-fitted XT90-S connector features a built-in step-down pre-charge resistor. Ensure full mechanical engagement into the female socket until seated to complete the primary high-current bridge.
Thermal Recovery Management: Following demanding high-discharge flight profiles where pack surface temperatures exceed 50°C, allow the pack to cool below 35°C in ambient shade before initiating balance charging.
Cell Matching & Safety: Individual pouch cells undergo strict factory sorting (ΔIR ≤ 0.2mΩ, ΔCapacity ≤ 1%). Never expose the soft pouch envelope to sharp punctures or mechanical crushing during payload mounting.
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 14.8V 4S 6000mAh 45C High-Rate LiPo Battery Pack for Industrial Inspection UAVs, verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Industrial UAVs, FPV platforms, and robotics requiring rapid burst response at 14.8V.
- Flight missions needing high energy density and stable voltage plateaus under heavy payload draw.
- Applications demanding verified Class 9 / UN38.3 compliance for commercial field logistics.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 16.8V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
6S vs 12S LiPo Battery for Drones: Voltage, Current, Weight, and Flight Time
Comprehensive engineering analysis on wiring resistive losses (I²R), ESC compatibility, and payload endurance trade-offs.
Drone Battery Capacity Guide: How Many mAh and Wh Does Your UAV Need?
Step-by-step formula to calculate power budget, payload weight, C-rate margins, and usable flight minutes.
Semi-Solid State UAV Batteries: High Energy Density Trends & 2026 Flight Horizons
Explore semi-solid state UAV battery technology: 280-320 Wh/kg energy density, silicon-carbon (Si-C) anodes, nail penetration safety, and flight time gains.
