GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm)

Grade-A GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm) (3.6V, 1400mAh) cylindrical battery with 18×50mm dimensions, low IR, and UN38.3 documentation for Electric bicycles, power tools, electric scooters, medical equipment, custom battery pack modules.

B2B Engineering Review & Pricing

Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.

✔ Response target: Target response within 12 business hours during business hours; timing varies by inquiry complexity and working hours.
✔ Typical Lead Time: 7–10 business days for prototypes; 15–20 business days for mass production after final specification approval. Final timing is confirmed after tooling, testing, and order review.
✔ Shipping documentation: Applicable UN38.3 test documentation, MSDS/SDS, CE and Class 9 dangerous-goods requirements are confirmed per selected configuration and shipment.

Product Details

Direct Answer / Engineering Summary

The GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm) is a compact cylindrical rechargeable cell delivering 3.6V nominal voltage and 1,400mAh rated capacity (5.04Wh). Measuring Ø 18.2 × 50.0 mm—precisely 15mm shorter than standard 18650 cells—with a light unit weight of Approx. 33.0g ± 1.5g, this cell is engineered for spatial-constrained industrial and consumer enclosures. Featuring a robust steel canister, pressure-relief safety valve, and steady 1.5C–2.0C (2.1A–2.8A) continuous discharge capability, it is widely utilized in smart digital door locks, professional cordless hair clippers, precision laser leveling instruments, and compact medical telemetry monitors.

Engineering Overview

Product Overview

The GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm) is a specialized reduced-height cylindrical rechargeable cell manufactured to strict electrochemical tolerances. Delivering 3.6V nominal potential and 1400mAh rated capacity (5.04Wh total energy), this cell provides the same 18mm diameter as an 18650 while reducing overall length by 15mm, achieving a light unit weight of Approx. 33.0g ± 1.5g. Featuring an integrated safety release vent, high volumetric efficiency, and automated cell sorting (ΔV ≤ 3mV, ΔR ≤ 1.5mΩ), it is engineered for smart electronic door locks, video doorbells, professional cordless hair clippers, handheld laser levels, and compact medical infusion equipment. Both flat-top and button-top terminals are supported for custom module assembly or drop-in cell replacement.

Quick Reference

Product Specifications

Feature / Attribute Technical Specification
Battery Chemistry Lithium Cobalt Oxide / Nickel Manganese Cobalt (ICR/NCM 18500 Compact Cylindrical)
Nominal Voltage & Capacity 3.6V / 1400mAh (5.04Wh total energy)
Physical Dimensions & Weight Ø 18.2 ± 0.2 mm × H 50.0 ± 0.3 mm (18500 Form Factor) / Approx. 33.0g ± 1.5g
Continuous Discharge Rating 1.5C–2.0C (2.1A–2.8A continuous discharge)
Peak Pulse Discharge 3.0C (4.2A pulse ≤ 5s)
Target Applications Smart electronic door locks, video doorbells, cordless hair clippers, laser leveling tools, compact medical monitoring pumps
Terminal Form Factor Flat Top / Button Top / Pre-welded Pure Nickel Solder Tabs
Service Life / Endurance ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C)
Engineering Data

Technical Specifications

Parameter Value Test Conditions & Engineering Tolerances
Nominal Operating Voltage 3.6V Standard measurement @ 25°C, 0.2C rate
Upper Voltage / Cutoff 4.20V ± 0.02V (CC/CV mode) Regulation tolerance ±0.02V, cutoff @ 0.02C
Discharge Lower Cutoff 2.75V ± 0.03V Protective lower threshold limit
Internal AC Resistance (1kHz) ≤ 35 mΩ 1kHz AC test @ 25°C fully charged state
Cell Consistency Screening ΔV ≤ 3mV | ΔR ≤ 1.5mΩ Pre-assembly automated barcode classification SOP
Operating Temperature Range Charge: 0~45°C | Discharge: -20~60°C Ambient environmental test qualification
Engineering Validation

Equipment Compatibility & Engineering Fit Check

Before deploying GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm), verify these verified electrical and mechanical boundary requirements:

☑
Voltage & Charge Cutoff: Nominal 3.6V (charging CC/CV cutoff at 4.2V); confirm charger algorithm strictly matches this chemistry.
☑
Capacity & Energy Budget: Rated at 1400mAh; verify system run-time calculations under planned discharge currents.
☑
Physical Envelope: Specified at 18×50mm; allow expansion clearance and wire bend radius inside the device compartment.
☑
Cycle Reliability: Verified for ≥ 500–1,000 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) under controlled DoD and thermal management.
💡 Custom Engineering Fit: Contact our Shenzhen engineering team to verify CAD models, custom wire leads, or system integration specs for this product.
Operational Suitability

Operational Boundary Conditions

✔ Recommended Fit & Use Cases:

  • Electronic devices and OEM packs matched with 3.6V / 1400mAh power curves.
  • Commercial designs requiring high volumetric energy density and predictable discharge curves.
  • Projects requiring batch consistency with automated barcode impedance sorting.

⚠ Operational Constraints & Limits:

  • Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
  • Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
  • Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Standards

First-Party Manufacturing SOP & Export Compliance

🏭 Automated Grading & Matching Cells classified via automated OCV/ACIR sorting (ΔV ≤ 2–3mV, ΔR ≤ 1.2mΩ) for tight electrochemical balance.
🔬 Joint Integrity & Testing Laser or ultrasonic busbar/tab welding with destructive pull test validation ≥ 5.0–8.0 kgf per terminal.
📦 Full Cycle Aging Verification 100% full charge-discharge cycle screening and thermal imaging prior to warehouse dispatch.
🌐 Export & Regulatory Clearance Supplied with certified UN38.3 test summaries, MSDS, 1.2m drop reports, and Class 9 DG shipping documentation.
Turnaround: 7–10 days prototypes; 15–20 days mass production per custom tooling requirements. View Verified Manufacturing Equipment & Testing Facility →

⚙ Engineering FAQ & B2B Procurement Specifications

Can GEB 18500 3.6V 1400mAh Cylindrical Lithium-ion (Li-ion) Battery Cell (18×50mm) be supplied with a pre-installed PCM, NTC thermistor, and wire connector?
Yes. While supplied as a bare Grade-A cell by default, GEB provides turnkey custom termination including Seiko/ichi-grade protection circuit modules (PCM), 10kΩ/100kΩ NTC thermistor leads, and genuine JST, Molex, or custom wire harnesses.
How does GEB ensure batch consistency for multi-cell series/parallel pack assembly?
Every production batch undergoes 100% automated OCV, AC internal resistance (1kHz ACIR), and capacity grading so cells shipped in the same lot maintain tight voltage and impedance matching.
Does GEB provide UN38.3 test summaries, MSDS, and Class 9 dangerous goods export compliance?
Yes. General Electronics Technology (GEB) supplies complete first-party compliance documentation including UN38.3 test summaries, 1.2m drop test reports, MSDS/SDS sheets, and certified IATA/IMDG Class 9 dangerous goods packaging.
What is the turnaround time and MOQ for custom cell terminations or pack assembly?
Standard bare cells or custom PCM/connector prototypes ship within 7 to 10 business days after drawing confirmation, with mass production turnaround of 15 to 20 business days.

Request Engineering Review & Custom Battery Quote

Submit your technical requirements, continuous/peak discharge loads, or enclosure dimensions for an immediate engineering assessment.

B2B Product Inquiry