GEB 18650 7.4V 1500mAh 10C High-Rate Li-ion Battery Pack (2S1P Configuration)
High-rate Grade-A GEB 18650 7.4V 1500mAh (11.1Wh) 2S1P lithium-ion battery pack (19×37×68mm, 92g) featuring 10C (15A) continuous discharge, 8.4V charge cutoff, integrated hardware BMS, and silicone leads for RC models, robotics, and power tools.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 18650 7.4V 1500mAh 10C High-Rate Li-ion Battery Pack (2S1P Configuration) is an engineered high-drain power pack assembled from two series-connected Grade-A 18650 1500mAh 10C power cells, delivering a verified 7.4V nominal working voltage, 8.40V full-charge cutoff, and 1,500mAh rated capacity (11.1Wh energy). Unlike standard energy-type cells, this high-drain assembly is optimized for motor drives and rapid actuators, delivering a sustained 10C continuous discharge rating (15.0A continuous) and up to 15C–20C peak pulse burst capability (22.5A–30.0A ≤ 5s). Arranged side-by-side with dimensions of 19.0×37.0×68.0mm and weighing approximately 92g, it features an integrated high-current protective circuit module (PCM/BMS) with calibrated low-voltage cutoff at 5.50V–6.00V.
Product Overview
The GEB 18650 7.4V 1500mAh 10C High-Rate Li-ion Battery Pack is built specifically for dynamic equipment requiring immediate high current delivery without severe voltage sag, including unmanned aerial vehicle (UAV) ground robotics, professional radio-controlled (RC) models, high-drain cordless power tools, and motorized medical devices. Constructed with two high-rate 18650 cylindrical cells interconnected by laser spot-welded pure nickel plates (≥ 0.2mm), high-temperature Kapton insulation, and flexible silicone wiring. The side-by-side physical pack measures 19.0 ± 0.5 mm × 37.0 ± 0.5 mm × 68.0 ± 1.0 mm with total pack weight of Approx. 92.0g ± 3.0g.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Pack Configuration | 2S1P (2 Series, 1 Parallel – 2× 18650 1500mAh 10C Cells) |
| Nominal Voltage & Capacity | 7.4V / 1500mAh (11.1Wh total pack energy) |
| Physical Dimensions & Weight | 19.0 ± 0.5 mm × 37.0 ± 0.5 mm × 68.0 ± 1.0 mm / Approx. 92.0g ± 3.0g |
| Continuous Discharge Rating | 10C continuous (15.0A continuous discharge) |
| Peak Pulse Discharge | 15C–20C peak pulse (22.5A–30.0A pulse ≤ 5 seconds) |
| Target Applications | Robotics, professional RC models, high-torque cordless tools, tactical lighting, portable actuators |
| Connectors & Wiring | High-flex 16–18 AWG silicone wires with XT30, XT60, Deans T-Plug, or JST connector |
| Baseline Cycle Life | ≥ 500–800 cycles (@ 80% DoD, 25°C, 1.0C rate) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 7.4V | Standard 0.2C discharge test @ 25°C |
| Full Charge Cutoff Voltage | 8.40V ± 0.04V (4.20V per series) | 2S CC/CV regulation mode, 0.02C termination current |
| Discharge Cutoff Voltage | 5.50V–6.00V ± 0.05V (2.75V–3.00V per series) | Integrated BMS hardware undervoltage protection |
| Standard Charging Current | 0.5C (750mA) | Maximum rapid charging current: 1.0C (1500mA) |
| Internal AC Resistance (1kHz) | ≤ 45 mΩ | Combined pack impedance including BMS and leads @ 25°C |
| Cell Consistency Screening | ΔV ≤ 2mV | ΔR ≤ 0.8mΩ | Rigorous cell pair matching prior to pack spot-welding |
| Operating Temperature Range | Charge: 0°C to 45°C | Discharge: -20°C to 60°C | Storage: 15°C to 25°C (7.6V–7.8V storage voltage) |
Integration & Operational Boundary Conditions
Charger Voltage Compatibility Note: This is a 2S 7.4V lithium-ion pack. Charging equipment MUST provide an 8.40V cutoff CC/CV charging profile. Never attempt charging with 4.2V 1S chargers or unregulated power supplies.
BMS Current Rating: Integrated PCM supports 15A continuous current and cuts off overcurrent at > 25A within 10ms to protect cell chemistry from external shorts or motor stall conditions.
OEM Customization: Available in side-by-side (19×37×68mm) or end-to-end stick (Ø18.5×132mm) configurations with custom wire harnesses, balance charging taps (JST-XH 3-pin), and private label branding.
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 18650 7.4V 1500mAh 10C High-Rate Li-ion Battery Pack (2S1P Configuration), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 7.4V / 1.5Ah power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 8.4V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
High-Performance Cylindrical Batteries: 16 Years of B2B Manufacturing
Technical breakdown of automated cell sorting, delta IR matching, laser welding busbars, and cycle aging protocols.
Industrial Cylindrical Batteries: QC, Aging and Test Standards
Key factory inspection criteria for cylindrical packs, thermal management, vibration testing, and BMS protection thresholds.
Smart Battery Packs and Matched SMBus Chargers: OEM Architecture & Safety Protocols
Technical engineering guide to Smart Battery Systems (SBS): SMBus communication protocol, TI impedance tracking gas gauges, closed-loop charging, and OEM safety architectures.
