GEB 401430 3.7V 120mAh Lithium Polymer (LiPo) Battery Cell (4×14×30mm)

Grade-A GEB 401430 3.7V 120mAh Lithium Polymer (LiPo) Battery Cell (4×14×30mm) (3.7V, 120mAh) pouch cell engineered for Ultra-compact wearable devices, wearable fitness sensors, Bluetooth earbuds, medical biosensors, and IoT asset trackers with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.

B2B Engineering Review & Pricing

Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.

✔ Response target: Target response within 12 business hours during business hours; timing varies by inquiry complexity and working hours.
✔ Typical Lead Time: 7–10 business days for prototypes; 15–20 business days for mass production after final specification approval. Final timing is confirmed after tooling, testing, and order review.
✔ Shipping documentation: Applicable UN38.3 test documentation, MSDS/SDS, CE and Class 9 dangerous-goods requirements are confirmed per selected configuration and shipment.

Product Details

Direct Answer: What Is the GEB 401430 3.7V 120mAh LiPo Battery Cell?

The GEB 401430 is a Grade-A, ultra-narrow lithium polymer (LiPo) pouch cell measuring exactly 4.0mm (T) × 14.0mm (W) × 30.0mm (L) with a nominal voltage of 3.7V and rated energy storage of 120mAh (0.444Wh). Weighing only 3.0 grams, this cell is engineered specifically for form-factor-constrained electronic devices—such as active digital stylus pens, smart eyewear frames, medical biosensors, and slim IoT telemetry nodes—where conventional cylindrical or wider rectangular cells cannot fit.

Nominal Voltage / Energy
3.7V / 0.444Wh
Rated Capacity
120mAh (@0.2C Discharge)
Dimensions (T×W×L)
4.0 × 14.0 × 30.0 mm
Continuous Discharge
1.0C (120mA Max)

Verified Electrical & Mechanical Specifications

Specification Parameter Standard Value Engineering Tolerance / Test Conditions
Cell Model Code GEB 401430 Thickness: 4.0mm, Width: 14.0mm, Length: 30.0mm
Nominal Operating Voltage 3.7V Plateau voltage measured at 0.2C rate
Nominal / Minimum Capacity 120mAh / 115mAh 0.2C discharge down to 3.0V @ 25°C ± 2°C
Stored Energy 0.444 Wh Ideal for sub-1W micro-power electronics
Internal AC Impedance ≤ 90 mΩ AC 1kHz test after standard charge
Charge Cut-off Voltage 4.20V ± 0.03V CC-CV charging method (0.02C cut-off)
Discharge Cut-off Voltage 3.00V BMS over-discharge threshold trigger
Standard Charge / Discharge Current 0.2C (24mA) / 0.2C (24mA) Recommended for maximum cycle longevity
Max Continuous Discharge Current 1.0C (120mA) Continuous thermal limit < 45°C
Cycle Retention Life ≥ 500 cycles Capacity retention ≥ 80% (@ 0.5C/0.5C, 25°C)
Bare Cell Net Weight Approx. 3.0g (±0.3g) Minimal mass impact for wearable comfort
Operating Temperature Range Charge: 0~45°C | Discharge: -20~60°C Storage: -10~35°C (45~75% RH)

Structural Advantages & Form Factor Comparison

Hardware engineering teams frequently encounter strict spatial boundaries when developing compact handheld instruments and smart personal devices. The GEB 401430 fills a critical gap between wide flat pouches and rigid button or cylindrical cells:

  • Optimized for Tubular & Narrow Cavities: With a width of only 14.0mm, the 401430 slips effortlessly into cylindrical enclosures (like digital pen shafts with inner diameters ≥ 15mm) where rectangular 20mm-wide cells like the GEB 402025 (4×20×25mm) cannot fit.
  • Ultralow Profile vs. Standard Cylindricals: At only 4.0mm thickness, it takes up less than half the vertical height of an AAA or 10440 battery while delivering stable 3.7V lithium-ion discharge characteristics.
  • Alternative to 352030 and 551525: Compared with the ultra-thin GEB 352030 (3.5×20×30mm), the 401430 provides a 30% narrower profile, sacrificing just 30mAh for significant mechanical layout flexibility. Learn more in our comprehensive engineering analysis on 401430 Li-Polymer Battery Guide for Compact IoT Prototyping.

Mechanical Integration & Fit Check Guidelines

1. Enclosure Clearance & Swelling Allowance: All lithium polymer pouch cells experience normal volumetric expansion during prolonged charge/discharge cycling. Product enclosures must provide a minimum clearance of 0.3mm to 0.4mm in thickness (total cavity thickness ≥ 4.4mm) and 0.5mm along width and length to prevent internal stress concentration.

2. Tab Welding & Bending Radius: The cell features nickel-plated positive and negative tabs. If tabs are bent during assembly, ensure a minimum bending radius of 1.5mm and keep bending points at least 2.0mm away from the top seal edge to avoid damaging the aluminum laminated packaging film.

3. Thermal Isolation: Place the battery cell away from high-heat-generating components such as microcontrollers, RF power amplifiers, or DC-DC step-down converters. Keep local cell surface temperatures below 45°C during operation.

OEM Customization & Protection Circuit Modules (PCM)

GEB offers end-to-end turnkey assembly services for volume B2B hardware manufacturers. We configure the 401430 into ready-to-plug sub-assemblies customized to your mechanical and electrical specifications:

Seiko / RichTek Precision PCM

Integrated ultra-compact protection board providing over-charge (4.28V ± 0.025V), over-discharge (3.0V ± 0.05V), short-circuit, and over-current trip protection with quiescent standby current < 3.0µA.

Micro Wire & Connector Leads

Custom UL1571 / UL3302 AWG 28–32 lead wires stripped and tinned, or crimped with micro-pitch connectors including JST ACH (0.8mm), JST SH (1.0mm), Molex PicoBlade (1.25mm), or Hirose DF13.

NTC Thermistor Integration

Optional 3-wire assembly with 10kΩ / 100kΩ NTC temperature thermistor directly bonded to the cell surface for precision host MCU thermal monitoring.

Global Safety Compliance & B2B Export Logistics

The GEB 401430 cell is manufactured under strict ISO 9001 quality systems. Each batch is compliant with international safety and transport mandates:

UN38.3 Certified (Air & Ocean DGR)
IEC 62133-2 Secondary Cells
CE / RoHS / REACH Compliant
MSDS Full Chemical Disclosure

Frequently Asked Engineering Questions

Q1: Can the GEB 401430 withstand 1C fast charging?

While the cell supports up to 1.0C charging in emergencies, we strongly advise a standard 0.2C (24mA) to 0.5C (60mA) CC-CV charging regime to retain maximum cycle life (≥ 500 cycles to 80% capacity) and avoid localized heating in sealed enclosures.

Q2: What is the Minimum Order Quantity (MOQ) for custom wire leads?

Standard samples of bare cells and pre-wired prototypes have an MOQ of only 5–10 units for R&D prototyping. Custom production runs with specific connector types and PCM layouts typically start at 1,000 units.

Q3: How does temperature affect capacity in outdoor medical/IoT hardware?

At 0°C, the cell retains approximately 85% of rated capacity. At -20°C, discharge capacity drops to approximately 65% with elevated internal impedance. For sub-zero operations, consult our engineering team for low-temperature electrolyte formulations.

Engineering Validation

Equipment Compatibility & Engineering Fit Check

Before deploying GEB 401430 3.7V 120mAh Lithium Polymer (LiPo) Battery Cell (4×14×30mm), verify these verified electrical and mechanical boundary requirements:

☑
Voltage & Charge Cutoff: Nominal 3.7V (charging CC/CV cutoff at 4.2V); confirm charger algorithm strictly matches this chemistry.
☑
Capacity & Energy Budget: Rated at 120mAh; verify system run-time calculations under planned discharge currents.
☑
Physical Envelope: Specified at 4×14×30mm (±0.3mm); allow expansion clearance and wire bend radius inside the device compartment.
☑
Cycle Reliability: Verified for ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) under controlled DoD and thermal management.
💡 Custom Engineering Fit: Contact our Shenzhen engineering team to verify CAD models, custom wire leads, or system integration specs for this product.
Operational Suitability

Operational Boundary Conditions

✔ Recommended Fit & Use Cases:

  • Electronic devices and OEM packs matched with 3.7V / 120mAh power curves.
  • Commercial designs requiring high volumetric energy density and predictable discharge curves.
  • Projects requiring batch consistency with automated barcode impedance sorting.

⚠ Operational Constraints & Limits:

  • Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
  • Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
  • Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Standards

First-Party Manufacturing SOP & Export Compliance

🏭 Automated Grading & Matching Cells classified via automated OCV/ACIR sorting (ΔV ≤ 2–3mV, ΔR ≤ 1.2mΩ) for tight electrochemical balance.
🔬 Joint Integrity & Testing Laser or ultrasonic busbar/tab welding with destructive pull test validation ≥ 5.0–8.0 kgf per terminal.
📦 Full Cycle Aging Verification 100% full charge-discharge cycle screening and thermal imaging prior to warehouse dispatch.
🌐 Export & Regulatory Clearance Supplied with certified UN38.3 test summaries, MSDS, 1.2m drop reports, and Class 9 DG shipping documentation.
Turnaround: 7–10 days prototypes; 15–20 days mass production per custom tooling requirements. View Verified Manufacturing Equipment & Testing Facility →

⚙ Engineering FAQ & B2B Procurement Specifications

Can GEB 401430 3.7V 120mAh Lithium Polymer (LiPo) Battery Cell (4×14×30mm) be supplied with a pre-installed PCM, NTC thermistor, and wire connector?
Yes. While supplied as a bare Grade-A cell by default, GEB provides turnkey custom termination including Seiko/ichi-grade protection circuit modules (PCM), 10kΩ/100kΩ NTC thermistor leads, and genuine JST, Molex, or custom wire harnesses.
How does GEB ensure batch consistency for multi-cell series/parallel pack assembly?
Every production batch undergoes 100% automated OCV, AC internal resistance (1kHz ACIR), and capacity grading so cells shipped in the same lot maintain tight voltage and impedance matching.
Does GEB provide UN38.3 test summaries, MSDS, and Class 9 dangerous goods export compliance?
Yes. General Electronics Technology (GEB) supplies complete first-party compliance documentation including UN38.3 test summaries, 1.2m drop test reports, MSDS/SDS sheets, and certified IATA/IMDG Class 9 dangerous goods packaging.
What is the turnaround time and MOQ for custom cell terminations or pack assembly?
Standard bare cells or custom PCM/connector prototypes ship within 7 to 10 business days after drawing confirmation, with mass production turnaround of 15 to 20 business days.

Request Engineering Review & Custom Battery Quote

Submit your technical requirements, continuous/peak discharge loads, or enclosure dimensions for an immediate engineering assessment.

B2B Product Inquiry