GEB 402030 3.7V 200mAh Lithium Polymer (LiPo) Battery Cell (4×20×30mm)

Grade-A GEB 402030 3.7V 200mAh Lithium Polymer (LiPo) Battery Cell (4×20×30mm) (3.7V, 200mAh) pouch cell engineered for Smart glasses, handheld barcode scanners, POS terminals, Bluetooth audio, and portable medical diagnostic pens with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.

B2B Engineering Review & Pricing

Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.

✔ Response target: Target response within 12 business hours during business hours; timing varies by inquiry complexity and working hours.
✔ Typical Lead Time: 7–10 business days for prototypes; 15–20 business days for mass production after final specification approval. Final timing is confirmed after tooling, testing, and order review.
✔ Shipping documentation: Applicable UN38.3 test documentation, MSDS/SDS, CE and Class 9 dangerous-goods requirements are confirmed per selected configuration and shipment.

Product Details

GEB 402030 3.7V 200mAh Lithium Polymer (LiPo) Battery Cell (4×20×30mm)

Brand: GEB |
Form Factor: Ultra-Thin Micro Pouch (4.0mm) |
Stored Energy: 0.74Wh |
Cell Mass: ~4.2g |
Custom Micro-PCM & Harness Assembly

Direct Answer / Engineering Summary

The GEB 402030 3.7V 200mAh (0.74Wh) is an ultra-miniature, high-volumetric-density Lithium Polymer pouch cell measuring exactly 4.0mm in thickness, 20.0mm in width, and 30.0mm in length with an ultra-light mass of just 4.2 grams. Engineered specifically for spatial-constrained wearable electronics, smart AR/VR eyewear temples, medical biosensors, and BLE IoT asset beacons, this Grade-A pouch cell supports a 1.0C continuous discharge rate (200mA) and 2.0C burst pulses (400mA ≤ 5s). GEB provides the 402030 as raw bare cells with solderable nickel tabs or turnkey assemblies integrated with ultra-slim Seiko protection circuitry (PCM), NTC thermistors, and micro-connectors (JST ACH/SUR 1.0mm, Molex PicoBlade 1.25mm).

Key Product Specifications & Quick Facts

Engineering Attribute Verified Specification (Raw Database Linked)
Cell Model Designation GEB-402030 (Thickness: 4.0mm, Width: 20.0mm, Length: 30.0mm)
Nominal Voltage & Chemistry 3.7V Nominal (Operating: 3.00V to 4.20V) / Lithium Cobalt Oxide / NCM
Rated Capacity & Total Energy 200mAh (0.20Ah @ 0.2C discharge, 25°C) / 0.740Wh
Charge Cut-off / Discharge Cut-off 4.20V ± 0.03V (CC/CV mode) / 3.00V ± 0.05V (low-voltage cut-off)
Continuous / Peak Discharge Rating 1.0C (200mA continuous) / 2.0C (400mA pulse burst ≤ 5 seconds)
Internal AC Impedance (1kHz) ≤ 120 mΩ (measured at 1kHz AC in 100% SoC state @ 25°C)
Physical Dimensions (T × W × L) 4.0 ± 0.2 mm × 20.0 ± 0.5 mm × 30.0 ± 0.5 mm (excluding tab seal)
Bare Cell Net Weight Approx. 4.2g ± 0.3g
Baseline Service Longevity ≥ 500–800 cycles (80% DoD @ 25°C, 0.5C charge / 0.5C discharge, residual ≥ 80%)
Operating Temperature Envelope Standard Charging: 0°C to +45°C / Discharging: -20°C to +60°C

Complete Parametric Specifications & Test Conditions

Test Item Specification Value Testing Method & Standard Tolerances
Standard Charging Current 0.2C (40mA) CC/CV Constant current 40mA to 4.20V, hold at 4.20V until current ≤ 4mA (0.02C).
Max Recommended Charge 0.5C (100mA) Ambient temperature must remain between 15°C and 40°C.
Gravimetric Energy Density ~176 Wh/kg 0.74Wh / 0.0042kg bare cell weight.
Swelling Allowance Over Life ≤ 4.35mm @ 500 cycles Micro-pouch breathing allowance. Enclosure cavity must reserve ≥ 0.4mm depth.
Storage Self-Discharge Rate ≤ 3.0% / month Stored at 20°C ± 5°C at 50% State-of-Charge (3.82V–3.85V).

Compatibility & Mechanical Integration Check

Due to the extreme spatial constraints of wearable and micro-IoT hardware, verify the following mechanical and electrical criteria:

  • Enclosure Pocket Clearance: Reserve a minimum internal cavity size of 4.4mm (Depth) × 21.0mm (Width) × 32.5mm (Length) to avoid localized mechanical pinching against internal PCB components or frame screws.
  • Continuous & Burst Current Draw: Confirm that your device’s continuous active power consumption is ≤ 200mA (0.74W) and wireless transmission bursts (e.g., BLE beaconing, LoRa pulses) remain below 400mA (≤ 500ms).
  • Precision PCM Sizing: If requesting a pre-assembled protection circuit, note that our micro-PCM sits directly on the cell header, extending total length by approximately 2.0mm–2.5mm (total length ~32.5mm).
  • Wire Gauge & Routing: We recommend ultra-fine UL1571 28AWG or 30AWG micro-leads with high flexibility to prevent mechanical torque on solder pads during assembly.
  • Charging IC Current Limit: Your onboard linear or switching battery charger IC (e.g., TI BQ24040, MCP73831) must be programmed with a charge termination current resistor set between 40mA and 100mA.

First-Party Engineering Evidence & Quality Control SOP

1. Cleanroom Micro-Pouch Lamination

Electrode winding and pouch packaging are performed in a Class 10,000 cleanroom with dew point control ≤ -45°C, ensuring minimal moisture ingress and preventing micro-swelling in ultra-thin 4.0mm profiles.

2. Seiko S-8261 Micro-PCM Circuit

Turnkey cells integrate a high-precision Seiko S-8261 protection IC with dual low-RDS(on) MOSFETs: Overcharge detection: 4.28V ± 0.025V; Over-discharge: 3.00V ± 0.05V; Over-current cutoff: 1.5A–2.5A.

3. High-Precision Laser Tab Trimming

Nickel and copper tabs are laser-trimmed to tight tolerances (±0.2mm) and pre-insulated with polyimide (Kapton) tape to eliminate any risk of short circuiting against internal metal battery enclosures.

4. 100% Automated Optical Inspection (AOI)

Every cell passes through AOI cameras to verify seal width, tab straightness, and surface flatness, followed by automated OCV and AC IR sorting prior to final packaging.

Engineering Judgment & Boundary Conditions

✓ Ideal Application Scenarios:

  • Smart augmented reality (AR) glasses and intelligent audio eyewear temple frames.
  • Wearable continuous physiological monitors, ECG biosensors, and digital medical thermometers.
  • Compact handheld barcode scanners, POS credit card signature pads, and digital voice recorders.
  • Ultra-compact BLE asset tracking beacons and smart key fobs.

✗ Not Recommended For:

  • High-drain motorized actuators or power tools drawing > 500mA continuous current.
  • Fast-charging systems charging at > 1.0C (200mA) without active thermal control.
  • Direct connection without PCM to unmanaged USB 5V charging inputs.

OEM / ODM Micro-Pouch Customization Options

Customization Feature Available Production Configurations Engineering Notes
Micro-Connectors Molex PicoBlade (1.25mm), JST (SUR 0.8mm, ACH 1.0mm, PHR 2.0mm), Custom Pre-crimped leads with verified positive/negative polarity
Lead Wire Specification UL1571 / UL1007 26AWG, 28AWG, 30AWG, Length from 20mm to 300mm Stripped and tinned wire ends for direct PCB soldering
Integrated PCM Standard 1S Seiko PCM, Low-power micro-PCM, NTC thermistor pinout Protection circuit insulated with high-dielectric Kapton film
Double-Sided Tape Factory pre-applied 3M 467MP / 9448A adhesive backing Facilitates rapid peel-and-stick installation into device cavities

B2B Procurement, Sample Lead Times & Compliance

  • Sample Prototyping: Bare cells in stock (2–3 business days); custom micro-connector wire assemblies dispatched in 5–7 business days.
  • Production MOQ: 500 units for standard bare cells; 1,000 units for custom connector assemblies (first-order pilot trial orders negotiable).
  • Production Lead Time: 15–18 business days for volume shipments.
  • Dangerous Goods Compliance: Shipped under UN3480 Section II / IA with full UN38.3 test summaries, MSDS, 1.2m drop test report, and CE/RoHS certificates.
  • Warranty: 12 months comprehensive manufacturer quality warranty with full batch traceability.

Frequently Asked Questions (FAQ)

Q1: Can the 402030 battery cell be charged at 1.0C (200mA) for faster turnaround?

We strongly recommend charging at 0.2C to 0.5C (40mA to 100mA) to preserve the cell’s 800-cycle life expectancy. While occasional 1.0C charging is possible, frequent 1.0C charging in confined non-ventilated enclosures can accelerate electrolyte dry-out and micro-swelling.

Q2: What is the standby current consumption of the integrated micro-PCM?

Our Seiko micro-PCM features an ultra-low quiescent current of ≤ 3.0 μA in normal mode and ≤ 0.1 μA in over-discharge sleep mode, ensuring the battery does not deep-discharge during extended shelf storage.

Q3: Can we request pre-installed 3M double-sided adhesive tape for production assembly?

Yes, we regularly apply high-shear 3M 467MP or 9448A double-sided tape with release tabs directly to the cell body, significantly speeding up production line assembly into eyewear frames and sensor housings.

Related Wearable & Polymer Battery Resources

Request 402030 Micro-Pouch Samples & Custom Harness Quote

Submit your enclosure depth limits, target operating current, connector model, and volume requirements. Our wearable battery engineering specialists will respond with 3D CAD step models and quotations within 12 hours.

Contact Wearable Engineers

Engineering Validation

Equipment Compatibility & Engineering Fit Check

Before deploying GEB 402030 3.7V 200mAh Lithium Polymer (LiPo) Battery Cell (4×20×30mm), verify these verified electrical and mechanical boundary requirements:

☑
Voltage & Charge Cutoff: Nominal 3.7V (charging CC/CV cutoff at 4.2V); confirm charger algorithm strictly matches this chemistry.
☑
Capacity & Energy Budget: Rated at 200mAh; verify system run-time calculations under planned discharge currents.
☑
Physical Envelope: Specified at 4×20×30mm (±0.3mm); allow expansion clearance and wire bend radius inside the device compartment.
☑
Cycle Reliability: Verified for ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) under controlled DoD and thermal management.
💡 Custom Engineering Fit: Contact our Shenzhen engineering team to verify CAD models, custom wire leads, or system integration specs for this product.
Operational Suitability

Operational Boundary Conditions

✔ Recommended Fit & Use Cases:

  • Electronic devices and OEM packs matched with 3.7V / 200mAh power curves.
  • Commercial designs requiring high volumetric energy density and predictable discharge curves.
  • Projects requiring batch consistency with automated barcode impedance sorting.

⚠ Operational Constraints & Limits:

  • Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
  • Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
  • Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Standards

First-Party Manufacturing SOP & Export Compliance

🏭 Automated Grading & Matching Cells classified via automated OCV/ACIR sorting (ΔV ≤ 2–3mV, ΔR ≤ 1.2mΩ) for tight electrochemical balance.
🔬 Joint Integrity & Testing Laser or ultrasonic busbar/tab welding with destructive pull test validation ≥ 5.0–8.0 kgf per terminal.
📦 Full Cycle Aging Verification 100% full charge-discharge cycle screening and thermal imaging prior to warehouse dispatch.
🌐 Export & Regulatory Clearance Supplied with certified UN38.3 test summaries, MSDS, 1.2m drop reports, and Class 9 DG shipping documentation.
Turnaround: 7–10 days prototypes; 15–20 days mass production per custom tooling requirements. View Verified Manufacturing Equipment & Testing Facility →

⚙ Engineering FAQ & B2B Procurement Specifications

Can GEB 402030 3.7V 200mAh Lithium Polymer (LiPo) Battery Cell (4×20×30mm) be supplied with a pre-installed PCM, NTC thermistor, and wire connector?
Yes. While supplied as a bare Grade-A cell by default, GEB provides turnkey custom termination including Seiko/ichi-grade protection circuit modules (PCM), 10kΩ/100kΩ NTC thermistor leads, and genuine JST, Molex, or custom wire harnesses.
How does GEB ensure batch consistency for multi-cell series/parallel pack assembly?
Every production batch undergoes 100% automated OCV, AC internal resistance (1kHz ACIR), and capacity grading so cells shipped in the same lot maintain tight voltage and impedance matching.
Does GEB provide UN38.3 test summaries, MSDS, and Class 9 dangerous goods export compliance?
Yes. General Electronics Technology (GEB) supplies complete first-party compliance documentation including UN38.3 test summaries, 1.2m drop test reports, MSDS/SDS sheets, and certified IATA/IMDG Class 9 dangerous goods packaging.
What is the turnaround time and MOQ for custom cell terminations or pack assembly?
Standard bare cells or custom PCM/connector prototypes ship within 7 to 10 business days after drawing confirmation, with mass production turnaround of 15 to 20 business days.

Request Engineering Review & Custom Battery Quote

Submit your technical requirements, continuous/peak discharge loads, or enclosure dimensions for an immediate engineering assessment.

B2B Product Inquiry