GEB 503759 3.7V 1200mAh Lithium Polymer (LiPo) Battery Cell (5×37×59mm)
Grade-A GEB 503759 3.7V 1200mAh Lithium Polymer (LiPo) Battery Cell (5×37×59mm) (3.7V, 1200mAh) pouch cell engineered for Industrial handheld PDA terminals, cellular IoT routers, GPS asset locators, and robotic inspection devices with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 503759 3.7V 1200mAh Lithium Polymer (LiPo) Battery Cell (5×37×59mm) is an ultra-slim, high-density pouch cell providing a verified 3.7V nominal operating voltage and 1200mAh rated capacity (4.44Wh energy content). With an optimized form factor measuring 5.0×37.0×59.0mm and a calibrated weight of approx. 25g, this cell achieves an internal AC resistance of ≤ 35 mΩ, continuous discharge rates up to 1.0C (1.2A), and peak pulse loads of 2.0C (2.4A ≤ 5s). Widely integrated into GPS asset tracking devices, wireless telemetry sensors, and portable industrial instrumentation, engineers should ensure the charging IC terminates charge precisely at 4.20V ± 0.02V in standard CC/CV mode.
Product Overview
The GEB 503759 3.7V 1200mAh Lithium Polymer (LiPo) Battery Cell is specifically optimized for applications demanding an ultra-thin 5.0mm vertical profile alongside robust cycle endurance. Built with premium electrode coatings and automated pouch vacuum sealing, this cell provides stable power delivery and exceptional thermal dissipation across rigorous operating duty cycles. Custom assembly options include pre-welded safety circuit modules (protecting against over-charge, over-discharge, short-circuits, and thermal runaway), 26/28AWG lead wires, and polarized locking connectors.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Cobalt Oxide / NCM Polymer (LiPo Pouch Cell) |
| Nominal Voltage & Capacity | 3.7V / 1200mAh (4.44Wh) |
| Physical Dimensions & Weight | 5.0 ± 0.3 mm × 37.0 ± 0.5 mm × 59.0 ± 0.5 mm / Approx. 25.0g ± 1.5g |
| Continuous Discharge Rating | 1.0C (1.2A continuous discharge) |
| Peak Pulse Discharge | 2.0C (2.4A pulse ≤ 5s) |
| Target Applications | GPS asset trackers, wireless telemetry nodes, industrial handheld PDAs, and portable testing equipment |
| Standard Terminals | Bare nickel tabs / optional PCM with JST, Molex, or solder leads |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 3.7V | Standard measurement @ 25°C, 0.2C rate |
| Upper Voltage / Cutoff | 4.20V ± 0.02V (CC/CV mode) | Standard regulation tolerance ±0.02V |
| Discharge Lower Cutoff | 3.00V ± 0.03V | Safety lower discharge voltage limit |
| Internal AC Resistance (1kHz) | ≤ 35 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.5mΩ | Pre-assembly automated barcode sorting SOP |
| Standard Charge Current | 0.2C–0.5C (240mA–600mA) / Max 1.0C (1200mA) | CC/CV charging to 4.20V cutoff |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Storage: 15~25°C (60% SoC storage) |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 503759 3.7V 1200mAh Lithium Polymer (LiPo) Battery Cell (5×37×59mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 1200mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
Materials Science of High-Energy Polymer Batteries: Cathode, Anode & Electrolyte Innovations
Explore the materials science behind high-energy lithium polymer batteries: silicon-carbon anodes, single-crystal high-nickel cathodes, and solid-state matrices.
