GEB 602540 3.7V 600mAh Lithium Polymer (LiPo) Battery Cell (6×25×40mm)
Grade-A GEB 602540 3.7V 600mAh Lithium Polymer (LiPo) Battery Cell (6×25×40mm) (3.7V, 600mAh) pouch cell engineered for Smart glasses, handheld barcode scanners, POS terminals, Bluetooth audio, and portable medical diagnostic pens with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 602540 3.7V 600mAh Lithium Polymer (LiPo) Battery Cell (6×25×40mm) is a Grade-A flexible pouch lithium polymer cell delivering a verified 3.7V nominal working voltage and 600mAh rated capacity (2.22Wh energy content). Enclosed in an ultra-slim aluminum-laminated barrier pouch measuring 6.0×25.0×40.0mm with a calibrated weight of approx. 14g, this cell provides an internal AC resistance of ≤ 45 mΩ, sustained 1.0C continuous discharge (600mA), and 2.0C transient pulse capability (1200mA ≤ 5s). Designed for smart glasses, handheld barcode scanners, compact POS terminals, and wearable medical sensors, engineers should reserve 0.3–0.5mm enclosure clearance to accommodate electrochemical expansion across charge cycles.
Product Overview
The GEB 602540 3.7V 600mAh Lithium Polymer (LiPo) Battery Cell is engineered to meet the demanding spatial and thermal constraints of compact commercial and medical electronics. Formulated with high-density Lithium Cobalt Oxide / NCM polymer chemistry, it delivers stable 3.7V plateau discharge performance and reliable cycle life under standard CC/CV charging protocols (4.20V cutoff). Featuring laser-trimmed bare nickel tabs with optional custom PCM protection circuitry and precrimped JST/Molex leads, the cell guarantees robust over-charge, over-discharge, and short-circuit defense for mission-critical hardware deployments.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Cobalt Oxide / NCM Polymer (LiPo Pouch Cell) |
| Nominal Voltage & Capacity | 3.7V / 600mAh (2.22Wh) |
| Physical Dimensions & Weight | 6.0 ± 0.3 mm × 25.0 ± 0.5 mm × 40.0 ± 0.5 mm / Approx. 14.0g ± 1.0g |
| Continuous Discharge Rating | 1.0C (600mA continuous discharge) |
| Peak Pulse Discharge | 2.0C (1200mA pulse ≤ 5s) |
| Target Applications | Smart glasses, handheld barcode scanners, POS terminals, Bluetooth audio, and portable medical diagnostic pens |
| Standard Terminals | Bare nickel solder tabs / optional PCM with JST, Molex, or color-coded silicone leads |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 3.7V | Standard measurement @ 25°C, 0.2C rate |
| Upper Voltage / Cutoff | 4.20V ± 0.02V (CC/CV mode) | Standard regulation tolerance ±0.02V, 0.02C termination |
| Discharge Lower Cutoff | 3.00V ± 0.03V | Safety lower discharge voltage limit via PCM / host controller |
| Internal AC Resistance (1kHz) | ≤ 45 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.5mΩ | Pre-assembly automated barcode sorting SOP |
| Standard Charge Current | 0.2C–0.5C (120mA–300mA) / Max 1.0C (600mA) | CC/CV charging to 4.20V cutoff |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Storage: 15~25°C (60% SoC storage) |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 602540 3.7V 600mAh Lithium Polymer (LiPo) Battery Cell (6×25×40mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 600mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
Rechargeable vs. Primary Battery Packs: Lifecycle Cost (LCC), Energy Density, and OEM ROI Analysis
Comprehensive OEM analysis of rechargeable vs primary battery packs: LCC modeling, self-discharge vs cycle life, Li-SOCl2 vs LiFePO4, and break-even ROI calculation.
