GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm)

Name: GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm)
Brand: GEB
Price: 12.79 USD
Availability: PreOrder

Grade-A GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm) (3.7V, 850mAh) pouch cell engineered for Industrial handheld PDA terminals, cellular IoT routers, GPS asset locators, and robotic inspection devices with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.

Lithium Polymer Battery

B2B Engineering Review & Pricing

Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.

⚡ Send Inquiry 📄 Request Datasheet & Pinout

✔ Response target: Target response within 12 business hours during business hours; timing varies by inquiry complexity and working hours.

✔ Typical Lead Time: 7–10 business days for prototypes; 15–20 business days for mass production after final specification approval. Final timing is confirmed after tooling, testing, and order review.

✔ Shipping documentation: Applicable UN38.3 test documentation, MSDS/SDS, CE and Class 9 dangerous-goods requirements are confirmed per selected configuration and shipment.

Product Details

Direct Answer / Engineering Summary

The GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm) is an industrial-grade rechargeable pouch cell supplying a verified 3.7V nominal operating voltage and 850mAh rated capacity (3.15Wh energy content). Encased in an aluminum-laminated package with calibrated physical dimensions of 6.0×30.0×48.0mm and an engineered unit weight of approx. 20g, it exhibits an AC impedance of ≤ 40 mΩ, sustained 1.0C continuous discharge (850mA), and 2.0C transient surge capability (1.7A ≤ 5s). Engineered specifically for industrial handheld PDA terminals, GPS asset locators, and cellular IoT communications nodes, it delivers dependable flat discharge characteristics across temperature extremes.

Engineering Overview

Product Overview

The GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell combines high volumetric energy storage with rugged pouch architecture to support continuous duty cycles in field-deployed equipment. Its advanced polymer electrolyte matrix prevents leakage and ensures high mechanical resilience against shock and vibration. Available in bare cell configuration or fully assembled with custom battery management circuitry (PCM), NTC temperature sensing, and customer-specified connectors, this cell complies with international transportation and safety protocols including UN38.3, RoHS, and CE standards.

Quick Reference

Product Specifications

Feature / Attribute	Technical Specification
Battery Chemistry	Lithium Cobalt Oxide / NCM Polymer (LiPo Pouch Cell)
Nominal Voltage & Capacity	3.7V / 850mAh (3.15Wh)
Physical Dimensions & Weight	6.0 ± 0.3 mm × 30.0 ± 0.5 mm × 48.0 ± 0.5 mm / Approx. 20.0g ± 1.5g
Continuous Discharge Rating	1.0C (850mA continuous discharge)
Peak Pulse Discharge	2.0C (1.7A pulse ≤ 5s)
Target Applications	Industrial handheld PDA terminals, cellular IoT routers, GPS asset locators, and robotic inspection devices
Standard Terminals	Bare nickel tabs / optional PCM with JST, Molex, or solder leads
Service Life / Endurance	≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C)

Engineering Data

Technical Specifications

Parameter	Value	Test Conditions & Engineering Tolerances
Nominal Operating Voltage	3.7V	Standard measurement @ 25°C, 0.2C rate
Upper Voltage / Cutoff	4.20V ± 0.02V (CC/CV mode)	Standard regulation tolerance ±0.02V
Discharge Lower Cutoff	3.00V ± 0.03V	Safety lower discharge voltage limit
Internal AC Resistance (1kHz)	≤ 40 mΩ	1kHz AC test @ 25°C fully charged state
Cell Consistency Screening	ΔV ≤ 3mV \| ΔR ≤ 1.5mΩ	Pre-assembly automated barcode sorting SOP
Standard Charge Current	0.2C–0.5C (170mA–425mA) / Max 1.0C (850mA)	CC/CV charging to 4.20V cutoff
Operating Temperature Range	Charge: 0~45°C \| Discharge: -10~55°C	Storage: 15~25°C (60% SoC storage)

Engineering Validation

Equipment Compatibility & Engineering Fit Check

Before deploying GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm), verify these verified electrical and mechanical boundary requirements:

☑

Voltage & Charge Cutoff: Nominal 3.7V (charging CC/CV cutoff at 4.2V); confirm charger algorithm strictly matches this chemistry.

☑

Capacity & Energy Budget: Rated at 850mAh; verify system run-time calculations under planned discharge currents.

☑

Physical Envelope: Specified at 6×30×48mm (±0.3mm); allow 5–10mm buffer in battery tray for expansion and lead harness.

☑

Cycle Reliability: Verified for ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) under controlled DOD and thermal management.

💡 Custom Engineering Fit: Contact our Shenzhen engineering team to verify CAD models, custom wire leads, or BMS CANbus telemetry for this product.

Operational Suitability

Operational Boundary Conditions

✔ Recommended Fit & Use Cases:

Electronic devices and OEM packs matched with 3.7V / 850mAh power curves.
Commercial designs requiring high volumetric energy density and predictable discharge curves.
Projects requiring batch consistency with automated barcode impedance sorting.

⚠ Operational Constraints & Limits:

Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
Ensure connector polarity and pin assignment match system schematics prior to initial power-up.

First-Party Standards

First-Party Manufacturing SOP & Export Compliance

🏭 Automated Grading & Matching Cells classified via automated OCV/ACIR sorting (ΔV ≤ 2–3mV, ΔR ≤ 1.2mΩ) for tight pack balance.

🔬 Joint Integrity & Testing Laser or ultrasonic busbar welding with destructive pull test validation ≥ 5.0–8.0 kgf per terminal.

📦 Full Cycle Aging Verification 100% full charge-discharge cycle screening and thermal imaging prior to warehouse dispatch.

🌐 Export & Regulatory Clearance Supplied with certified UN38.3 test summaries, MSDS, 1.2m drop reports, and Class 9 DG shipping documentation.

Turnaround: 7–10 days prototypes; 15–20 days mass production per custom tooling requirements. View Verified Manufacturing Equipment & Testing Facility →

Decision Support

Technical Whitepapers & Engineering Guides

Complete Guide Read Guide →

What is a LiPo Battery [2026 Complete Engineering Guide]

In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.

Specs Decoded Read Guide →

Understanding S, P, and C in LiPo Battery Specs Explained

Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.

Safety & Limits Read Guide →

Basics of Battery Discharging: C-Rate, Cutoff Voltage and Safety Limits

Critical operating boundaries, recommended depth of discharge (DoD), and thermal limits to prevent swelling and cycle degradation.

⚙ Engineering FAQ & B2B Procurement Specifications

What is the turnaround time for custom battery pack prototypes and mass production for GEB 603048 3.7V 850mAh Lithium Polymer (LiPo) Battery Cell (6×30×48mm)?

Custom prototype development typically requires 7 to 10 business days after CAD drawing approval and technical specification freeze. Commercial mass production turnaround is typically 15 to 20 business days. Standard OEM minimum order quantities (MOQ) start at 50 to 100 units depending on cell chemistry, custom mold tooling, and casing complexity.

Does GEB provide UN38.3 test summaries, MSDS, and Class 9 dangerous goods export compliance?

Yes. General Electronics Technology (GEB) provides complete first-party compliance verification for all industrial battery packs, including UN38.3 test reports, 1.2m drop test appraisal certificates, MSDS/SDS sheets, and certified dangerous goods packaging compliant with IATA air transport and IMDG maritime shipping regulations.

What smart telemetry protocols and BMS protection features are supported?

Our custom smart BMS architectures support industry-standard communication protocols including UAVCAN, CANbus 2.0B, SMBus, UART, and RS485. Integrated hardware protections include multi-tier over-voltage, over-discharge, continuous over-current, short-circuit, and dual-channel NTC thermal cutoff safeties with active cell balancing options.

What are the recommended continuous and peak burst discharge margins?

To maximize lifecycle endurance and electrochemical stability, we recommend designing with a 15% to 20% continuous discharge headroom margin under typical operating loads. Peak burst discharge ratings should strictly adhere to specified duration windows (typically ≤10 seconds) while ensuring pack operating temperatures remain below 65°C.