GEB 606068 3.7V 3000mAh Ultra-Thin LiPo Battery Cell (6.0×60×68mm)
Grade-A 3.7V 3000mAh Ultra-Thin Lithium Polymer (LiPo) Battery Cell for Tablets & E-Readers (3.7V, 3000mAh) pouch cell engineered for Industrial handheld PDA terminals, cellular IoT routers, GPS asset locators, and robotic inspection devices with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 606068 3.7V 3000mAh Ultra-Thin LiPo Battery Cell (6.0×60×68mm) is an industrial Grade-A Lithium Polymer pouch cell delivering 3.7V nominal operating voltage, 3,000mAh rated capacity (11.1Wh energy content), and reliable continuous discharge up to 1.0C (3.0A). Encapsulated in a slim multi-layer aluminum-plastic barrier pouch with physical dimensions of 6.0mm × 60.0mm × 68.0mm and a calibrated unit weight of 55.0g, this cell maximizes volumetric energy density in thin handheld electronics. With low internal resistance (≤ 25–35 mΩ) and full cycle reliability (≥ 500–800 cycles), it is engineered for commercial tablet PCs, e-readers, industrial POS terminals, and portable diagnostic displays. Integrators must reserve an 8%–10% thickness expansion clearance within the battery housing.
Product Overview
The GEB 606068 3.7V 3000mAh Ultra-Thin LiPo Battery Cell (6.0×60×68mm) provides robust runtime for slim flat-panel electronic equipment. Delivering 3.7V nominal voltage and 3000mAh rated capacity, it utilizes advanced micro-porous polymer separators and high-purity active materials. Featuring physical dimensions of 6.0 ± 0.3 mm × 60.0 ± 0.5 mm × 68.0 ± 0.5 mm and a calibrated unit weight of Approx. 55.0g ± 2.0g, it is targeted for tablet computers, digital e-readers, warehouse mobile handheld barcode terminals, cellular IoT routers, and portable medical ultrasound monitors.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Cobalt Oxide / NCM Polymer (LiPo Pouch) |
| Nominal Voltage & Capacity | 3.7V / 3000mAh (11.1Wh) |
| Physical Dimensions & Weight | 6.0 ± 0.3 mm × 60.0 ± 0.5 mm × 68.0 ± 0.5 mm / Approx. 55.0g ± 2.0g |
| Continuous Discharge Rating | 1.0C (3.0A continuous discharge) / Max 1.5C (4.5A) |
| Peak Pulse Discharge | 2.0C (6.0A pulse ≤ 5s) |
| Target Applications | Tablet PCs, e-readers, handheld POS terminals, cellular IoT routers, portable monitors |
| Standard Terminals | Bare nickel tabs / Optional integrated PCM with JST/Molex leads |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 3.7V | Standard discharge @ 25°C, 0.2C rate |
| Upper Voltage / Cutoff | 4.20V ± 0.02V (CC/CV mode) | Standard Li-ion charge regulation threshold |
| Discharge Lower Cutoff | 2.75V – 3.00V ± 0.03V | PCM / Controller low-voltage cutoff threshold |
| Standard Charge Current | 0.2C–0.5C (600mA to 1500mA) | Max recommended fast charge: 1.0C (3000mA) |
| Internal AC Resistance (1kHz) | ≤ 25–35 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.5mΩ | Pre-assembly automated barcode classification SOP |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Ambient environmental test qualification |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 606068 3.7V 3000mAh Ultra-Thin LiPo Battery Cell (6.0×60×68mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 3000mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
How to Contact GEB Battery Engineering: RFQ Submission, Custom Pack Sourcing & Support
Official guide to contacting GEB Battery engineering and sales: RFQ submission checklist, custom pack sourcing protocols, direct phone/email channels, and factory audit booking.
