GEB 606090 3.7V 4000mAh Lightweight Lithium Polymer Battery Cell (6×60×90mm)
Grade-A GEB 606090 3.6V 4000mAh Lightweight Lithium Polymer Battery Cell (6×60×90mm) (3.6V, 4000mAh) pouch cell engineered for Rugged industrial tablets, portable medical ultrasound, UAV ground control telemetry, and emergency backup units with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 606090 3.7V 4000mAh Lightweight Lithium Polymer Battery Cell (6×60×90mm) is an ultra-slim high-capacity pouch cell tailored for rugged commercial tablets, drone ground control stations, and portable medical ultrasound monitors. Delivering a verified 3.7V nominal voltage (compatible with 3.6V–3.7V system architectures) and 4000mAh rated capacity (14.8Wh energy content), this cell features an internal impedance of ≤ 18–25 mΩ and supports 1.0C continuous discharge (4.0A) with 2.5C pulse capability (10.0A ≤ 5s). Housed in a flexible high-barrier aluminum-plastic pouch with a calibrated unit mass of 75.0g (±2.0g), it provides superior space utilization compared to cylindrical packs. Ensure verification of battery enclosure dimensions (6.0 × 60.0 × 90.0 mm) and connector requirements prior to deployment.
Product Overview
The GEB 606090 3.7V 4000mAh Lithium Polymer Battery Cell is engineered to deliver maximum volumetric energy density in flat device enclosures. Featuring a 3.7V nominal operating voltage and 4000mAh rated capacity (14.8Wh total energy), this cell utilizes advanced high-energy-density cathode materials and low-impedance electrolyte systems. With physical dimensions of 6.0 ± 0.3 mm × 60.0 ± 0.5 mm × 90.0 ± 0.5 mm and a calibrated unit weight of Approx. 75.0g ± 2.0g, it is optimized for industrial handheld tablets, mobile POS terminals, UAV ground telemetry links, and field test equipment. Optional integrated PCM boards provide overcharge, over-discharge, overcurrent, and thermal cutoff protection.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Polymer (NCM/LCO Pouch Cell) |
| Nominal Voltage & Capacity | 3.7V / 4000mAh (14.8Wh) |
| Physical Dimensions & Weight | 6.0 × 60.0 × 90.0 mm (±0.3mm) / Approx. 75.0g ± 2.0g |
| Continuous Discharge Rating | 1.0C–1.5C (4.0A–6.0A continuous discharge) |
| Peak Pulse Discharge | 2.5C (10.0A peak pulse ≤ 5s) |
| Target Applications | Rugged industrial tablets, portable medical ultrasound, UAV ground telemetry, mobile POS terminals |
| Standard Terminals | Bare nickel tabs / Custom PCM with JST, Molex, or high-flex wire leads |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 3.7V | Standard measurement @ 25°C, 0.2C rate |
| Upper Voltage / Cutoff | 4.20V ± 0.02V (CC/CV mode) | Standard regulation threshold with 0.02C cutoff current |
| Discharge Lower Cutoff | 3.00V ± 0.03V | PCM / Controller automatic low-voltage cutoff threshold |
| Standard Charge Current | 0.2C–0.5C (800mA–2000mA) / Max 1.0C (4000mA) | CC/CV charging to 4.20V cutoff |
| Internal AC Resistance (1kHz) | ≤ 18–25 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.0mΩ | Pre-assembly automated barcode classification SOP |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Storage: 15~25°C (60% SoC storage) |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 606090 3.7V 4000mAh Lightweight Lithium Polymer Battery Cell (6×60×90mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 4Ah power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
LiPo Innovations: Reshaping High-Drain Power Applications
Explore high-drain LiPo pouch innovations: multi-tab z-fold stacking, AC IR ≤ 1.0mΩ, 45C continuous discharge, and voltage sag prevention for robotics & eVTOL.
