GEB 703048 3.7V 1000mAh Lithium Polymer (LiPo) Battery Cell (7×30×48mm)
Grade-A GEB 703048 3.7V 1000mAh Lithium Polymer (LiPo) Battery Cell (7×30×48mm) (3.7V, 1000mAh) pouch cell engineered for Industrial handheld PDA terminals, cellular IoT routers, GPS asset locators, and robotic inspection devices with ultra-low IR, optional PCM circuit, and UN38.3 documentation where applicable.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 703048 3.7V 1000mAh Lithium Polymer (LiPo) Battery Cell (7×30×48mm) is an industrial-grade rechargeable pouch cell delivering 3.7V nominal operating voltage and 1,000mAh rated capacity (3.70Wh total energy). Engineered for compact data capture devices, cellular asset trackers, and portable medical diagnostic instruments, this cell features low internal impedance (≤ 30–40 mΩ) and supports continuous discharge currents up to 2.0C (2.0A) with 3.0C pulse capability (3.0A ≤ 5s). Its high-density polymer stacking ensures dependable electrochemical performance and low thermal rise during rapid operational cycles. Designers must provide adequate mechanical clearance for thickness expansion (allow 0.6mm buffer) and verify connector requirements before production rollout.
Product Overview
The GEB 703048 3.7V 1000mAh Lithium Polymer Battery Cell combines compact physical packaging with generous 1Ah energy capacity. With standard physical dimensions of 7.0 × 30.0 × 48.0 mm (±0.3mm) and a unit weight of Approx. 23.5g ± 1.0g, it is widely utilized in industrial handheld barcode terminals, GPS vehicle and asset tracking units, portable security intercoms, emergency lighting, and wearable industrial sensors. GEB provides comprehensive customization options including high-integrity PCM protection circuits, UL certified wiring harnesses, and custom connector terminations (JST, Molex, AMP).
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Cobalt Oxide / NCM Polymer (LiPo Pouch Cell) |
| Nominal Voltage & Capacity | 3.7V / 1000mAh (3.70Wh) |
| Physical Dimensions & Weight | 7.0 × 30.0 × 48.0 mm (±0.3mm) / Approx. 23.5g ± 1.0g |
| Continuous Discharge Rating | 1.0C–2.0C (1.0A–2.0A continuous discharge) |
| Peak Pulse Discharge | 3.0C (3.0A pulse ≤ 5s) |
| Internal AC Resistance (1kHz) | ≤ 30–40 mΩ (@ 25°C fully charged) |
| Target Applications | Industrial handheld barcode terminals, cellular IoT routers, GPS asset locators, portable medical diagnostic devices |
| Terminal & Lead Options | Bare nickel tabs / Custom PCM with JST, Molex, Hirose or tin-plated leads |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Voltage | 3.7V | Standard measurement @ 25°C, 0.2C discharge |
| Upper Charge Voltage Cutoff | 4.20V ± 0.02V | CC/CV charge mode, 0.02C termination current |
| Discharge Lower Cutoff | 3.00V ± 0.03V | PCM / Controller automatic low-voltage safety cutoff |
| Standard Charge Current | 0.2C–0.5C (200mA to 500mA) | Max recommended fast charge: 1.0C (1000mA) |
| Internal AC Resistance (1kHz) | ≤ 30–40 mΩ | 1kHz AC test @ 25°C fully charged state |
| Cell Consistency Screening | ΔV ≤ 3mV | ΔR ≤ 1.5mΩ | Pre-assembly automated barcode classification |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -10~55°C | Storage: 15~25°C (60% SoC storage) |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 703048 3.7V 1000mAh Lithium Polymer (LiPo) Battery Cell (7×30×48mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 1000mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
What is a Battery: Electrochemical Cell Principles, Operating Parameters & Industrial Battery Selection
Technical guide explaining electrochemical battery fundamentals: redox reactions, primary vs secondary cells, key engineering parameters (C-rate, Wh/kg, IR), and industrial selection.
