GEB 803450 11.1V 5200mAh Lithium Polymer Battery Pack (3S3P Configuration)
Grade-A GEB 803450 11.1V 5200mAh Lithium Polymer Battery Pack (3S3P Configuration) (11.1V, 5200mAh) lithium polymer pouch battery with compact pouch dimensions, low IR, and UN38.3 documentation for Electric bicycles, power tools, electric scooters, medical equipment, custom battery pack modules.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 803450 11.1V 5200mAh Lithium Polymer Battery Pack (3S3P Configuration) is an industrial-grade multi-cell rechargeable LiPo battery pack delivering a verified 11.1V nominal operating voltage (3S series architecture) and 5,200mAh total capacity (57.72Wh total energy). Assembled from nine matched 803450 pouch cells (3 series, 3 parallel) and protected by an onboard precision Battery Management System (BMS), the pack maintains continuous discharge currents up to 2.0C (10.4A) with 3.0C pulse capability (15.6A ≤ 5s). Encased in robust blue PVC shrink packaging with heavy-duty 14AWG silicone wiring and XT60/JST-XH balance leads, it is engineered for RC vehicles, robotics, mobile inspection platforms, and portable field electronics. Ensure battery bay dimensions allow for 105 × 50 × 24.5 mm enclosure clearance and charger settings match 12.60V CC/CV regulation.
Product Overview
The GEB 803450 11.1V 5200mAh Lithium Polymer Battery Pack represents a high-energy, space-efficient power solution combining high-rate lithium polymer chemistry with advanced multi-cell balancing. Measuring 105 × 50 × 24.5 mm (±1.5mm) and weighing Approx. 320g ± 10g, this pack integrates nine Grade-A 803450 cells with low AC internal impedance (≤ 45–60 mΩ at pack output terminals). The integrated protection circuit module safeguards against over-charge, over-discharge, short circuit, and cell imbalance. Designed for radio-controlled vehicles, autonomous rovers, field telemetry stations, and commercial portable instruments, it provides superior volumetric energy density compared to traditional cylindrical packs.
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Cobalt Oxide / NCM Polymer (3S3P Multi-Cell LiPo Pack) |
| Nominal Voltage & Capacity | 11.1V / 5200mAh (57.72Wh) |
| Physical Dimensions & Weight | 105 × 50 × 24.5 mm (±1.5mm) / Approx. 320g ± 10g |
| Continuous Discharge Rating | 2.0C (10.4A continuous discharge) |
| Peak Pulse Discharge | 3.0C (15.6A pulse ≤ 5s) |
| Internal AC Resistance (1kHz) | ≤ 45–60 mΩ (measured at pack discharge connector) |
| Target Applications | RC vehicles, autonomous ground robots, inspection rovers, portable field telemetry, survey equipment |
| Wiring & Connector | 14AWG High-Flex Silicone Leads with XT60 / T-Plug + JST-XH 4-Pin Balance Connector |
| Service Life / Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C/0.5C) |
Technical Specifications
| Parameter | Value | Test Conditions & Engineering Tolerances |
|---|---|---|
| Nominal Operating Voltage | 11.1V | 3S Configuration (3.7V per series stage @ 0.2C rate) |
| Upper Voltage / Cutoff | 12.60V ± 0.05V (CC/CV mode) | Full charge cutoff (4.20V per series cell) |
| Discharge Lower Cutoff | 9.00V ± 0.10V | Integrated BMS low-voltage safety cutoff (3.00V/cell) |
| Standard Charge Current | 0.5C (2.6A) / Max 1.0C (5.2A) | CC/CV charge mode with balance charger |
| Protection Circuit (BMS) | Over-charge, over-discharge, over-current, cell balance, short-circuit protection | Integrated smart PCB |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -20~60°C | Ambient environmental operational range |
| Storage Recommendation | 11.4V–11.6V (50%–60% SoC), 15~25°C | Optimal warehouse long-term storage condition |
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 803450 11.1V 5200mAh Lithium Polymer Battery Pack (3S3P Configuration), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 11.1V / 5200mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 12.6V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
Home Energy Storage Systems (HESS): Architecture, LiFePO4 Sizing & OEM Market Guide
Comprehensive engineering guide to Home Energy Storage Systems (HESS): AC vs DC coupling architectures, LiFePO4 battery sizing (5-20kWh), hybrid inverters, and global market drivers.
