GEB 9059156 3.7V 10000mAh Lithium Polymer (LiPo) Battery Cell (9.0×59×156mm)
High-capacity 3.7V 10000mAh (37Wh) 9059156 lithium polymer (LiPo) pouch cell (9.0×59×156mm, Approx. 185g) delivering high volumetric energy density, low IR, and UN38.3 certification for rugged industrial terminals, medical monitors, and custom battery packs.
B2B Engineering Review & Pricing
Direct manufacturer supply, custom BMS telemetry, and CAD fit validation for OEM/ODM projects.
Product Details
The GEB 9059156 3.7V 10000mAh Lithium Polymer (LiPo) Battery Cell is an industrial high-capacity single-cell pouch unit engineered for compact commercial hardware. Delivering a verified 3.7V nominal working voltage and 10,000mAh rated capacity (37.0Wh energy), this cell follows the industry-standard dimension designation 9059156 (9.0mm thickness × 59.0mm width × 156.0mm length). Built with laminated aluminum-plastic film packaging and high-purity cobalt-rich cathode material, it provides superior volumetric energy density, ultra-low internal resistance (≤ 15mΩ), and a continuous 1C–2C discharge capability for industrial handhelds, portable medical diagnostic equipment, and customized multi-cell battery packs.
Product Overview
The GEB 9059156 3.7V 10000mAh LiPo Cell represents an optimized balance between slim mechanical form factor and high energy capacity. Weighing approximately 185g, it provides high gravimetric energy density (>200Wh/kg) suited for devices where cylindrical cells are too bulky. Equipped with ultrasonic-welded positive aluminum and negative nickel terminal tabs, the cell is ready for direct spot-welding to protection circuit modules (PCM/BMS) or grouping into high-voltage 2S–10S configurations. Factory quality control ensures strict dimensional consistency (±0.3mm thickness) and low self-discharge (≤ 3% per month at room temperature).
Product Specifications
| Feature / Attribute | Technical Specification |
|---|---|
| Battery Chemistry | Lithium Polymer (LiCoO2 / NMC Pouch Cell) |
| Model / Dimensional Code | 9059156 (Thickness 9.0mm × Width 59.0mm × Length 156.0mm) |
| Nominal Voltage & Capacity | 3.7V / 10000mAh (37.0Wh) |
| Physical Dimensions | 9.0 ± 0.3 mm × 59.0 ± 0.5 mm × 156.0 ± 1.0 mm (Excluding Tabs) |
| Cell Unit Weight | Approx. 185 g (±5g) |
| Continuous Discharge Rating | 1.0C Continuous (10A) / Max Peak 2.0C (20A ≤ 10s) |
| Terminal Tabs | Positive: Aluminum (Al) / Negative: Nickel (Ni), Tab Width 10mm |
| Target Applications | Industrial rugged tablets, mobile POS terminals, medical monitoring devices, IoT base stations |
| Cycle Endurance | ≥ 500–800 cycles (@ 80% DoD, 25°C, 0.5C charge/discharge) |
Technical Specifications
| Parameter | Value | Test Conditions & Tolerances |
|---|---|---|
| Nominal Operating Voltage | 3.7V | Standard measurement @ 25°C, 0.2C discharge rate |
| Upper Voltage / Charge Cutoff | 4.20V ± 0.03V | CC/CV charge mode, 0.02C termination current |
| Discharge Lower Cutoff | 3.00V ± 0.05V | Safety cutoff threshold (absolute minimum 2.75V) |
| Standard Charge Current | 0.2C (2000mA) | Full charge in approx. 5.5 hours |
| Maximum Rapid Charge Current | 0.5C–1.0C (5000mA–10000mA) | CC/CV charge with thermal supervision |
| Internal AC Resistance (1kHz) | ≤ 12–18 mΩ | 1kHz AC test @ 25°C fully charged state |
| Operating Temperature Range | Charge: 0~45°C | Discharge: -20~60°C | Storage: -10~35°C (3.80V–3.85V storage SoC) |
Integration & System Design Guidelines
PCM / BMS Protection Thresholds: Always integrate a safety circuit board providing overcharge cutoff at 4.25V ± 0.025V, overdischarge cutoff at 2.80V ± 0.05V, and continuous overcurrent protection matched to the end device.
Mechanical Packaging Constraints: The aluminum laminated pouch can swell slightly (up to 8%–10% thickness expansion) over its full service life. Design the device enclosure battery compartment with at least 1.0mm thickness clearance.
Tab Soldering & Ultrasonic Bonding: Direct soldering with rosin-core flux must be restricted to the nickel portion of the negative tab or nickel extensions pre-welded to the aluminum tab. Soldering time must not exceed 3 seconds at 350°C to prevent heat transfer to the seal edge.
Equipment Compatibility & Engineering Fit Check
Before deploying GEB 9059156 3.7V 10000mAh Lithium Polymer (LiPo) Battery Cell (9.0×59×156mm), verify these verified electrical and mechanical boundary requirements:
Operational Boundary Conditions
✔ Recommended Fit & Use Cases:
- Electronic devices and OEM packs matched with 3.7V / 10000mAh power curves.
- Commercial designs requiring high volumetric energy density and predictable discharge curves.
- Projects requiring batch consistency with automated barcode impedance sorting.
⚠ Operational Constraints & Limits:
- Do not discharge below minimum cutoff voltage or charge beyond 4.2V.
- Maintain operational surface temperature within -20°C to +60°C discharge (0°C to +45°C charge).
- Ensure connector polarity and pin assignment match system schematics prior to initial power-up.
First-Party Manufacturing SOP & Export Compliance
Technical Whitepapers & Engineering Guides
What is a LiPo Battery [2026 Complete Engineering Guide]
In-depth overview of polymer chemistry, pouch packaging safety, high energy density, and custom geometric form factors.
Understanding S, P, and C in LiPo Battery Specs Explained
Clear technical guide to cell series/parallel architectures, voltage multiplication, and continuous vs burst discharge ratings.
GEB Energy Storage Battery Systems: Commercial & Residential ESS Engineering Guide
Explore GEB LiFePO4 energy storage battery systems: 51.2V rack-mount & high-voltage C&I architectures, 6,000-cycle life, CAN/Modbus BMS integration, and inverter compatibility.
